NuPool Epoxy

NuPool Epoxy is a durable, chemical-resistant pool coating designed for concrete and fibreglass surfaces. Ideal for resurfacing and protecting pools with a smooth, long-lasting finish.

NuPool Epoxy

NuPool Epoxy is a durable, chemical-resistant pool coating designed for concrete and fibreglass surfaces. Ideal for resurfacing and protecting pools with a smooth, long-lasting finish.

2 Pack Product
Coloured
Durable
Reduces Organic Growth
Waterproof

NuPool Epoxy is a high-build, isocyanate-free gloss epoxy coating designed for long-term protection of concrete and fibreglass pools. It’s tough; the water-impervious formula is ideal for both new surfaces and for recoating aged, two-pack epoxy-coated pools. Whether you’re working on residential or commercial pools, this product offers a sleek finish with reliable performance.

Formulated for strength and durability, NuPool Epoxy provides outstanding resistance to abrasion, scuffing, and waterborne chemicals. It also protects against fatty oils, alkalis, acids, and efflorescence. These features make it a popular choice for professionals looking for a long-lasting and cost-effective pool coating.

This epoxy system is suitable for bare concrete, fibreglass, or surfaces previously coated with compatible two-pack epoxy. It’s easy-to-apply, self-priming formula bonds well with prepared surfaces, delivering a smooth and glossy result that stands up to everyday use.

Available in 10 standard colours, NuPool Epoxy allows for design flexibility while enhancing both appearance and durability. Its finish not only improves the look of worn pool interiors but also helps reduce ongoing maintenance.

For best results, pair this product with proper surface preparation and cleaning. You can find more guidance within the NuTech Pool Coatings range, which includes a full suite of pool protection solutions.

If you’re looking to revive a tired pool or protect a new one, this epoxy system offers a high-performance, professional-grade finish that lasts.

Concrete Pools
Fibreglass Pools

Isocyanate Free
Excellent adhesion
Excellent hardness
Outstanding chemical resistance
Hard-wearing
High resistance to corrosion and abrasion
Will resist bacterial growth
Easy application by brush, roller or spray

Kit Size:	4L, 10L, 20L
Appearance:	Opaque or Coloured viscous liquid
pH:	<1.0
Solubility:	EPiC Epoxy Thinners
Coats Required:	2 Coats
Recoat Time:	5 – 72 Hours
Touch Dry:	2 – 4 Hours at 25°C
Full Cure:	7 Days
Pot Life:	4 – 5 Hours
Ambient Application Temperature:	15°C – 30°C
Coverage Rate:	6 – 8 m²/L

Equipment & Tools

Brush or Roller (see TDS for spray application)

Pressure washer and vacuum cleaner

Drop sheets, cardboard or old tarps

Preparation

Degrease the entire pool with EcoSafe Degreaser
Pressure clean the whole pool with a >2000psi pressure washer
Ensure all stains, oil and chemical residue are removed. Repeat the cleaning process if needed
For bare concrete, etch the surface using EcoSafe Etch and rinse well
For old or existing 2-pack epoxy surfaces, sand or abrade the entire surface
Make any spot repairs to cracks or chips
Vacuum the entire pool with a soft-bristle head. Ensure that all debris has been removed.
Create a safe mixing area near the pool with drop sheets, tarps or cardboard.

Coat One

Mix the first coat of NuPool Epoxy using the 3:1 ratio (2-part kit) by adding NuPool Epoxy Part B into NuPool Epoxy Part A
Mix the two parts thoroughly using a drill mixer
Add EPiC Epoxy 500 Thinner (approx 20%) and mix again
Allow the paint to stand for 10 minutes before application
Use a brush to cut in all edges and corners with NuPool, then roll to cover the surface
Allow drying for 5 hours (temperature dependent) before applying the second coat
DO NOT wait more than 72 hours before applying a second coat

Coat Two

Mix the second coat of NuPool Epoxy using the 3:1 ratio (2-part kit) by adding NuPool Part B into NuPool Part A
Mix the two parts thoroughly using a drill mixer
Allow the paint to stand for 10 minutes before application
Use a brush to cut in all edges and corners with NuPool Epoxy, then roll to cover the surface
Allow drying for 5 hours (temperature dependent)

Non-Slip

To create a non-slip surface, apply Nutech Coarse Anti-Slip to the second coat while still wet.
If anti-slip has been applied, use a third coat of NuPool Epoxy over the areas.

Curing

NuPool Epoxy takes seven days to cure into a hard and durable surface completely. During this time, the pool must be kept dry. If the surface becomes wet, remove all water and allow it to continue curing.