EcoSafe MossRid is a pure organic biodegradable cleaner that removes moss, mould, lichen and algae from roofs, decks, paths, driveways and other hard surfaces. Designed for homeowners, councils and contractors, EcoSafe MossRid offers powerful on-contact cleaning without bleach or harsh solvents so you can restore surfaces safely around plants and pets and prepare areas for painting or sealing.
Why use EcoSafe MossRid now
Summer offers the ideal weather window for safe, effective moss and lichen removal. Warmer, drier days accelerate drying and improve treatment effectiveness. Removing growth improves safety, reduces slip risk, and brings instant curb appeal while also preparing the surface for a sealer or paint job.
Where to use EcoSafe MossRid
Use on a wide range of exterior surfaces:
• Roof tiles, metal, and asphalt
• Concrete driveways paths and pavers
• Timber decks and painted surfaces
• Brick walls fences and retaining walls
• Outdoor furniture, umbrellas and shade sails
• Ceramic tiles cladding and natural stone
EcoSafe MossRid is suitable as a pre-paint wash or sterilising cleaner prior to applying PaveCoat Nupool or other NuTech coatings.
Key features and benefits
• Pure organic biodegradable non-toxic formula
• Kills moss, lichen, mould, algae and spores on contact
• Helps prevent regrowth for longer-lasting results
• Low odour, low VOC water-based formula with water clean up
• Safe for use around plants pets and sensitive environments when used as directed
• Excellent pre-paint wash and surface steriliser for prepping areas before recoating
Short step-by-step DIY guide
- Prepare the area
Clear leaves debris and loose dirt. Protect nearby plants and drains by wetting exposed garden beds and placing covers where necessary. Check the weather forecast and pick a dry day with no heavy rain for at least 24 hours. - Protect yourself and the site
Wear gloves, eye protection and long sleeves. Although EcoSafe MossRid is non-toxic, it can irritate eyes and skin in some cases. Have a hose or bucket of water ready to rinse plants or overspray. For full safety details, see the Safety Data Sheet. EcoSafe_MossRid-SDS_AUS - Apply EcoSafe MossRid
Dilute or use neat, as directed on the product label, and apply evenly with a garden sprayer, pump sprayer, or brush. Allow the product to dwell for the time recommended on the label so it can act on the growth. - Agitate and remove
After dwell time, scrub with a stiff nylon broom or brush. For stubborn patches, use a plastic scraper. For larger areas, a low-pressure rinse or a light-pressure washer on a low setting can be used; avoid high pressure, which can damage joints or softer substrates. - Rinse and let dry
Rinse thoroughly into a suitable area and avoid directing runoff into sensitive garden beds or stormwater drains. Let the surface dry fully. Summer conditions typically give the fastest dry times. - Inspect and treat spots
Repeat spot treatments on any remaining patches, then allow to dry. Once completely dry, consider applying a NuTech sealer or protective coating to reduce regrowth and extend the life of your finish.
Important safety handling, storage and disposal notes
EcoSafe MossRid is marketed as a biodegradable, non-toxic cleaner, but it should still be handled with common sense and care. The Safety Data Sheet includes hazard and first aid information and is the authoritative source for safe use. Please read it before use and follow the recommended PPE and spill procedures.
Key practical points from the EcoSafe_MossRid-SDS_AUS
• Wear protective gloves, eye protection, and protective clothing when handling the product.
• Avoid eye contact and prolonged skin contact. In case of eye exposure, rinse with water for 15 minutes and seek medical attention.
• Avoid release to waterways and drains. Collect and dispose of any large spills in accordance with local regulations.
• Store in a cool, dry, ventilated place away from foodstuffs and out of reach of children.
Aftercare and prevention tips
• Sweep and clear organic debris regularly to slow re-growth.
• Trim overhanging branches and improve sunlight to shaded paths and roofs.
• Consider applying a compatible sealer or protective coating after cleaning to reduce water penetration and organic growth.
• For heavily shaded high-risk areas, schedule routine checks and repeat treatment if needed.
FAQ’s – Quick Answers
Yes, when used as directed, EcoSafe MossRid is safe for garden areas but always pre wet sensitive plants and rinse any accidental overspray with water. For larger or sensitive landscapes, consider temporary protective covers.
Wait until the surface is completely dry. Dry times vary with weather but allow 24 to 72 hours before sealing and follow the sealer manufacturer’s instructions.
Email or call us at one of our local branches for professional application and product advice. Contact us here.
Mount Beauty Public Pool Revitalised with NuPool Coatings
The Mount Beauty Public Pool in Victoria has recently undergone a stunning transformation, with a complete resurfacing project carried out by one of our Approved Applicators, Rod Bundle. This large-scale refurbishment has breathed new life into the facility, delivering a vibrant, long-lasting finish that’s ready for years of community enjoyment.
Preparing the Surface
Before coating could begin, the existing worn and weathered pool surface required thorough preparation. Old coatings and contaminants were mechanically removed to create a sound, clean substrate, a vital step to ensure maximum adhesion and durability of the new system.
Application and Finish
Once preparation was complete, Rod applied NuPool Epoxy Pool Coating in Bluebell, with classic black lane markings to suit public use and comply with pool safety standards. The two-pack epoxy system provides exceptional chemical resistance, colour retention, and waterproof protection, making it ideal for public and commercial pool environments.
The result is a smooth, glossy surface that not only enhances the pool’s visual appeal but also delivers long-term performance and easy maintenance.
Community Impact
The refreshed Mount Beauty pool now stands as a showcase of quality workmanship and coating performance, ready to welcome swimmers for many seasons ahead. With its brilliant Bluebell finish, the pool reflects both the town’s scenic mountain setting and the reliability of NuTech’s high-performance coating systems.
Project Summary
- Location: Mount Beauty, VIC
- Applicator: Rod Bundle (Approved Applicator)
- Product Used: NuPool Epoxy Pool Coating
- Colours: Bluebell (main), Black (lane lines)
- System Type: Two-pack epoxy pool coating system
For more information about NuPool coatings, visit nutech.com.au/product/nupool or contact us to find an Approved Applicator near you.
Location: Fairmont Orchid Resort, Hawai‘i Island (Big Island), HI
Scope: Multi-building resort roofs (oceanfront)
System: NuTech Primer + 2x NXT Cool Coat (custom colour match)
Completed: December 2024
Approved Partners: Cool Roof Store; Leak Master Roofing
Setting
On the Kohala Coast of Hawai‘i Island, the Fairmont Orchid’s oceanfront buildings face intense sun, salt air, and year-round guest traffic. Any finish must look immaculate and perform well under harsh coastal conditions.
The brief
Deliver a high-performance cool roof system in a custom colour that harmonises with the resort’s architecture and landscape, while enabling efficient application and minimal downtime.
System used
- Primer: NuTech Primer for strong adhesion and an even base.
- Topcoat: Two coats of NXT Cool Coat, a water-based, heat-reflective roof coating engineered for durable colour, weather resistance, and long-term appearance retention.
Application & partners
Work was completed in December 2024 by Nutech-approved applicators and suppliers: Cool Roof Store and Leak Master Roofing. Their coordination across multiple roof sections ensured clean cut-ins, consistent film build, and a smooth, uniform finish.
Result
A fresh, cohesive coastal tone that elevates curb appeal from every vantage, pool deck to shoreline, while delivering the reflective performance today’s hospitality properties expect.
