• Concrete
• Exposed Aggregate
• Asphalt
• Natural Stone
• Bricks
• Concrete Pools
• Fibreglass Pools
• Metal Surfaces

• Water-based formula for safer handling and easier cleanup

• Biodegradable and environmentally friendly, minimizing ecological impact

• Non-flammable, reducing fire hazards during storage and use

• Non-abrasive to most surfaces, helping preserve substrate integrity

• Free from phosphates and chlorine, making it safer for the environment and waterways

• Contains no Toxic or Hazardous Air Pollutants (TAPs or HAPs), supporting better air quality

• Easy cleanup with just running water, eliminating the need for harsh solvents

• Non-ozone-depleting, safe for the atmosphere

• Fast-acting and effective, delivering cleaning power comparable to conventional solvent-based degreasers

• Suitable for use in parts washers, steam cleaners, and pressure washers, offering versatility in various cleaning applications

Equipment

Apply using a brush, mop, sponge, hand sprayer, garden sprayer, pump sprayer, or chemical applicator. Ensure adequate safety gear is worn, including gloves and safety glasses.

Preparation

Remove all loose debris and ensure the surface is dry before application.

Dilution

• For heavily oil-contaminated concrete and asphalt, use the degreaser undiluted.

• For general cleaning, dilute at a ratio of 1 part EcoSafe Degreaser to 4 parts fresh water. Adjust dilution as needed based on soil level.

Test Area

Always conduct a test on a small, inconspicuous area to determine suitability, dilution, and required dwell time.

Application

Liberally apply the solution to the soiled area using the chosen method. Allow a minimum of 5 minutes for the degreaser to penetrate and loosen soils; for heavily soiled concrete, asphalt, or flooring, allow up to 2 hours dwell time. Agitate stubborn areas with a brush or broom as needed. Rinse thoroughly with clean water, washing vertical surfaces from top to bottom to prevent re-soiling.

Clean Up

Rinse equipment and treated surfaces thoroughly with clean water. For optimal results, use a high-pressure washer to remove loosened contaminants and residues.

Download EcoSafe Degreaser TDS
Download EcoSafe Degreaser SDS

Avoid ingestion, skin and eye contact. Wear eye protection and rubber or synthetic gloves.

When applying product using spray applicators wear NIOSH approved respirator. In case of eye or skin irritation, flush with cold water for 15 minutes. If swallowed do not induce vomiting, seek immediate medical attention.

Dispose of product in accordance with applicable environmental regulations. When using the soap injector line of a pressure washer, be sure to measure dilution ratios according to the setting of the intake valve.