PaveCoat Same Day Sealer

Seal freshly poured concrete the same day with PaveCoat Same Day Sealer, the solvent-based acrylic solution that improves curing, reduces dusting, and protects colour.

PaveCoat Same Day Sealer

Seal freshly poured concrete the same day with PaveCoat Same Day Sealer, the solvent-based acrylic solution that improves curing, reduces dusting, and protects colour.

Car
Green Concrete
Solvent Based

PaveCoat Same Day Sealer is a solvent-based acrylic concrete sealer specially designed for application to freshly poured concrete. Its unique formula allows it to be applied on the same day the concrete is poured, helping to lock in moisture, enhance curing strength, and protect the surface from early-stage damage. This makes it an ideal choice for builders and contractors who need immediate sealing performance without compromising quality.

This product penetrates the surface to form a dust-reducing, wear-resistant barrier. It improves long-term durability and reduces efflorescence, particularly on coloured concrete.

Key Features and Benefits

Apply directly to green curing concrete on the same day of pouring
Improves curing efficiency and surface hardness
Minimises salt efflorescence on coloured concrete
Reduces surface dusting and early wear
Enhances colour retention on decorative finishes
No gloss finish for safety and simplicity (gloss optional with additional PaveCoat layer)
Suitable for faux brick without the need for thinning
Excellent surface penetration for smooth and rough textures

Concrete

Improves the curing efficiency of concrete
Reduces concrete salt ‘efflorescence’ on coloured surfaces
Provides greater wear resistance and durability
Improves colour retention of coloured concrete
Prevents surface dusting
Suitable for a range of smooth and rough surfaces
Excellent surface penetration
Ideal for faux brick, without additional thinning

Packaging:	20L
Appearance:	Clear viscous liquid
Solubility:	PaveCoat Thinners
Film Forming Temperature:	10°C
Dry Film Thickness:	30 microns
Coats Required:	1
Touch Dry:	15 Minutes
Full Cure:	7 Days
VOC Levels:	85%
Flammability:	Highly (>85% Volatiles)
Ambient Application Temperature:	10°C – 30°C
Coverage Rate:	5 m²/L

For detailed substrate preparation and application steps, please download the full application guide.

Preparation

PROVIDING THAT the concrete surface is firm and resistant to light foot traffic, PaveCoat Cure & Seal can be applied. Ensure the surface is clean and not saturated with moisture.

NOTE: PaveCoat Cure & Seal assists in moisture retention to improve the concrete curing process. Next-day sealing with this product is NOT RECOMMENDED.

If same-day sealing is impractical, NuTech Paint recommends allowing the new concrete surface to cure for a minimum of 7 days before application^*. PaveCoat is the recommended sealer.

Refer to the relevant TDS for appropriate preparation and application instructions.

^*Subject to weather, temperature, concrete strength and other factors.

In winter, concrete can remain cold and wet on the surface for up to seven days. Sealing this surface with PaveCoat Cure & Seal is NOT recommended in these conditions.

Equipment

Airless Spray, Roller or Brush

Conditions

10°C to 30°C ambient, dry conditions.
Do not apply if: Rain is likely within 12 hours, it is late in the day or early in the morning. Failure to observe these directions can result in coating damage and surface clouding.

Application
PaveCoat Cure & Seal has been developed for same-day sealing of freshly poured concrete (including slate or stencilled finishes), provided the surface is firm and can support light foot traffic.

Before application, ensure the surface is clean, free from dust and debris, and not saturated with moisture.

If PaveCoat Cure & Seal is applied on the same day as the pour, it helps retain moisture and supports the curing process. In this case, the surface can be re-sealed with PaveCoat as early as the next day.
If same-day sealing is not possible, the concrete should be allowed to cure for a minimum of 7 days before applying PaveCoat Cure & Seal.*

*Drying and curing times may vary depending on weather conditions, ambient temperature, and concrete strength. Concrete may remain damp on the surface in colder months for up to seven days. Sealing is not recommended until the surface begins to whiten, indicating that the concrete has sufficiently cured.

For further technical information regarding this product, refer to the Technical Data Sheet link on this page.

Apply one even coat
For gloss finish, apply an additional coat of PaveCoat

DOWNLOAD CARE & MAINTENANCE BROCHURE

ANTISLIP SKID TEST

ANTISLIP MIX IN

Download Care & Maintenance Guide

Download PaveCoat Same Day Sealer TDS
Download PaveCoat Same Day Sealer SDS

Do not apply PaveCoat Same Day Sealer late in the day or early in the morning. Sealer affected by moisture loses gloss and may appear milky.

PaveCoat Same Day Sealer contains flammable solvents; suitable safety precautions must be taken during handling and application.

Ensure adequate ventilation at all times when applying the sealer. Avoid contact with Naked flames, Sparks, Pilot lights and other sources of ignition.
Avoid contact with the Eyes and Skin

PaveCoat Same Day Sealer is highly flammable, and skin contact should be avoided.

Where to buy?

Set my location

Colours Options

See range of colours

PaveCoat Same Day Sealer

PaveCoat Same Day Sealer

Seal freshly poured concrete the same day with PaveCoat Same Day Sealer, the solvent-based acrylic solution that improves curing, reduces dusting, and protects colour.