NuCourt Roll Coat

NuCourt Roll Coat is a water-based acrylic coating for roller application on asphalt and concrete sports courts. It delivers a non-slip, weather-resistant finish with excellent durability and surface protection.

NuCourt Roll Coat

NuCourt Roll Coat is a water-based acrylic coating for roller application on asphalt and concrete sports courts. It delivers a non-slip, weather-resistant finish with excellent durability and surface protection.

Coloured
Durable
Low VOC
Sports
Water Based

NuCourt Roll Coat is a water-based acrylic coating designed for use with a short-nap roller on asphalt and concrete sports surfaces. As part of the NuCourt Sports Surface System, it creates a high-build, slip-resistant finish that performs well in all weather conditions.

This coating is ideal for facilities that require a smooth, durable playing surface. It applies easily with a roller and forms a resilient, UV-stable surface that resists fading, bacteria, mould, and general wear. The result is a long-lasting finish that withstands foot traffic and outdoor exposure.

NuCourt Roll Coat features a low-VOC, water-based formula, making it safer to use and more environmentally responsible than solvent-based alternatives. Its smooth, consistent texture also improves playability and enhances safety by reducing surface irregularities.

For complete system compatibility, pair this product with NuCourt Line Marking for precise, long-lasting line definition. Together, they form a complete solution for professional court resurfacing or new installations.

If you’re looking for a high-performance sports coating that delivers long-term value, this roller-applied acrylic system is built for reliability and ease of use.

Concrete
Asphalt

Low VOC
Specifically designed for hard sports surfaces
Developed for roller application
UV stable and non-fading
Can be line marked with NuCourt Line Marking
Suitable for all weather conditions
Excellent protection against bacteria and mould
High build, smooth surface coating

Packaging:	4L, 15L
Appearance:	Coloured viscous liquid
pH:	9.0
Solubility:	Water
Film Forming Temperature:	12°C
Dry Film Thickness:	200 microns
Coats Required:	2 Coats
Recoat Time:	8 – 24 Hours
Touch Dry:	4 Hours
Full Cure:	7 Days
VOC Levels:	0%
Colours:	6 Standard Colours
Flammability:	Non-Flammable
Ambient Application Temperature:	12°C – 30°C
Coverage Rate:	4.5 m²/L

Preparation:

The surface must be clean and free of all lichen, moss, grease, oil, chewing gum, silicon and other foreign matter.

Moss and Lichen Contamination: Use Nutech Hypo per the relevant TDS, allowing the surface to dry thoroughly after complete preparation.

Grease & Oil: Use EcoSafe Degreaser in accordance with the relevant TDS.

Use a high-pressure water blast (> 2500 PSI) to remove any grease, oil, food, or stains. Allow to dry thoroughly.

Repair: All non-structural cracking and any surface damage. Nutech Paint recommends seeking professional advice regarding any structural or drainage issues prior to the commencement of works.

Any ponding of water deeper than 20mm will require patch repairing.
Where the existing coating has been removed, patch repair the surface using NuCourt Fill Coat in accordance with the relevant TDS

For preparation specific to concrete or asphalt surfaces, refer to the TDS

Application:

First Coat: Apply one coat of NuCourt Roll Coat

Method:

Pour a windrow of NuCourt Roll Coat parallel to the court edge.
Apply even downward pressure and avoid leaving thick film sections on either side of the applicator.
Walking in the direction of the windrow, spread with the applicator to obtain an even cover, then reverse direction.
Always maintain a wet edge
Allow the coat to dry.

After the coating is dry, inspect the surface and scrape or grind off any excess lumps or irregularities

Second Coat: Apply NuCourt Roll Coat in the above-described method.

Top Coat Pre-Existing Surfaces:

In accordance with the methods described in the TDS

For Line Marking:

Refer to NuCourt Line Marking

DOWNLOAD CARE & MAINTENANCE BROCHURE

Download Care & Maintenance Guide

Download NuCourt Roll Coat TDS
Download NuCourt Roll Coat SDS

For preparation guidelines specific to concrete or asphalt surfaces, consult the TDS before application

Where to buy?

Set my location

Brochure

Read Brochure

Colours Options

See range of colours

NuCourt Roll Coat

NuCourt Roll Coat

NuCourt Roll Coat is a water-based acrylic coating for roller application on asphalt and concrete sports courts. It delivers a non-slip, weather-resistant finish with excellent durability and surface protection.