EPiC PolyCryl
High Strength Acrylic Polymer Coating
EPiC PolyCryl
High Strength Acrylic Polymer Coating
-
2 Pack Product
-
Clear
-
Coloured
-
Industrial Grade
-
ISO Free
-
Solvent Based
-
Waterproof
EPiC PolyCryl is a strong, solvent-based 2-pack acrylic coating built to protect and improve concrete, timber, masonry, and primed metal. It works well in both indoor and outdoor spaces and suits a wide range of commercial and industrial uses.
This hard-wearing coating withstands scuffing, wear, and impact from daily use. It also withstands intense exposure to petrol, oil, fatty acids, and alkalis. Because of this, it’s perfect for areas that see regular traffic or exposure to harsh substances.
You can also use it as a sacrificial anti-graffiti finish. When tagged with graffiti, the surface can be cleaned without harming the coating underneath. That makes it ideal for schools, public buildings, train stations, and street-facing walls.
The finish looks smooth and clean, with clear and coloured options available. It also dries quickly, so you can return to service sooner. Due to its long lifespan and low maintenance, it’s a smart choice for anyone seeking to protect surfaces without requiring constant upkeep.
From schools to warehouses, EPiC PolyCryl gives you a strong, easy-to-maintain finish that resists damage, looks sharp, and keeps your surfaces cleaner for longer.
- Concrete
- Metal Surfaces
- Excellent interior and exterior durability
- Isocyanate free
- Hard-wearing
- Excellent adhesion and hardness
- High resistance to corrosion and abrasion
- Impervious to water and moisture
- Easy application
| Kit Size: | 4L, 20L |
|---|---|
| Appearance: | Clear or Coloured Viscous Liquid |
| Solubility: | X-5 Solvent |
| Film Forming Temperature: | 10°C |
| Dry Film Thickness: | 60 microns |
| Coats Required: | 2 Coats |
| Recoat Time: | 4 – 12 Hours |
| Touch Dry: | 2 – 4 Hours |
| Full Cure: | 7 Days |
| VOC Levels: | 60% |
| Colours: | 29 Standard Colours |
| Flammability: | Highly Flammable |
| Gloss Levels: | Gloss |
| Pot Life: | 8 Hours |
| Ambient Application Temperature: | 10°C to 30°C ambient, dry condition. |
| Coverage Rate: | 8 – 10 m2/L |
For detailed substrate preparation and application steps, please download the PolyCryl application guide.
Equipment Type
Roller or Brush.
Spray.
Do not store the mixed product in spray equipment to avoid damage.
Surface Preparation
Prepare bare concrete surfaces using EcoSafe Etch or EcoSafe Ultra Etch following the recommendations in the relevant TDS. Allow the surface to dry thoroughly before application.
Mixing
Mixing 3 Parts A to 1 Part B (single 2-pack kit). Mix using a drill mixer; hand siring is not sufficient. Leave to stand for 10 minutes before use to allow full activation.
Do not use after the pot life has expired (8 hours).
Thinning
For spray application, use 10% – 15% with X-5 Solvent. Do not thin for brush or roller application.
Bare concrete and masonry surface thin 20% – 25% with X-5 Solvent for first coat application for increased penetration and adhesion.
Application
Roller or brush: Apply two even coats, observing minimum film thickness, recoat and dry times as outlined in the TDS
Spray: Apply 2-3 even coats, observing minimum film thickness, recoat and dry times as outlined in the TDS
Drying and Curing
EPiC PolyCryl should be touch dry and recoatable after 4 hours. For a complete cure, allow the item to dry for 7 days.
Clean Up
Clean all surfaces and equipment using X-5 Solvent.
Observe all relevant Work Safe criteria for spraying 2 pack paint systems and wear an approved respirator. Refer to the SDS for further information.
Ensure there is good airflow and ventilation. Avoid contact with skin and eyes.
Where to buy?
Set my locationColours Options
See range of colours
EPiC PolyCryl
Related Products
EcoSafe Etch
EcoSafe Etch is designed for mature concrete and provides a suitable finish prior to sealing…
View products
