EPiC Aqua Epoxy
High Strength, 2 Pack, Water Based Epoxy
EPiC Aqua Epoxy
High Strength, 2 Pack, Water Based Epoxy
-
2 Pack Product
-
Clear
-
Coloured
-
Industrial Grade
EPiC Aqua Epoxy is a high-strength, water-based, low-VOC, 2-pack epoxy floor coating. It protects concrete, timber, masonry, and primed metal surfaces. EPiC Aqua Epoxy has been developed to provide excellent interior durability and protection against petrol, oil, fatty oils, alkali, acid, and efflorescence. It is ideal for various applications, such as commercial and industrial floors and walls.
EPiC Aqua Epoxy is also food-grade compliant and can be used in various areas, including restaurants, hospitals and supermarkets.
Protects Against
- Petrol
- Oil
- Fatty Oils
- Alkali
- Acid
- Efflorescence
- Concrete
- Metal Surfaces
- Excellent interior durability
- Hardwearing
- Excellent adhesion
- Excellent hardness
- High resistance to abrasion
- Impervious to water and moisture
- Corrosion-resistant
- Easy application by brush, roll or spray
| Kit Size: | 4L, 20L |
|---|---|
| Appearance: | Clear or coloured viscous liquid |
| Solubility: | Water |
| Film Forming Temperature: | 15°C |
| Dry Film Thickness: | 100 microns |
| Coats Required: | 2 Coats |
| Recoat Time: | 4 – 24 Hours |
| Touch Dry: | 1 – 2 Hours |
| Full Cure: | 7 Days |
| VOC Levels: | 6% |
| Colours: | 9 Standard Colours |
| Flammability: | Low (6% Volatiles) |
| Gloss Levels: | High Gloss |
| Pot Life: | 2 Hours |
| Ambient Application Temperature: | 10°C to 30°C ambient, dry conditions. |
| Coverage Rate: | 8 – 10 m2/L |
For detailed substrate preparation and application steps, please download the AquaEpoxy application guide.
Equipment Type
Roller or Brush.
Spray.
Do not store the mixed product in spray equipment to avoid damage.
Surface Preparation
Prepare bare concrete surfaces using EcoSafe Etch or EcoSafe Ultra Etch, following the recommendations in the relevant TDS. Allow the surface to dry thoroughly before application.
Mixing
Mixing 3 Parts A to 1 Part B (single 2-pack kit). Mix using a drill mixer; hand stirring is not sufficient. Leave to stand for 10 minutes before use to allow full activation.
Do not use it after the pot life has expired (2 hours).
Thinning
For spray application, use a 10% to 15% solution with clean water. Do not thin for brush or roller application.
Bare concrete and masonry surfaces should be thinned by 20%— 25% before the first coat is applied to enhance penetration and adhesion.
Drying and Curing
EPiC Aqua Epoxy should be touch dry and recoatable after 2 hours. For a complete cure, allow the area to dry for seven days.
Application
Roller or brush: Apply two even coats, observing minimum film thickness, recoat and dry times as outlined in the TDS
Spray: Apply 2-3 even coats, observing minimum film thickness, recoat and dry times as outlined in the TDS
Observe all relevant Work Safe criteria for spraying 2 pack paint systems and wear an approved respirator. Refer to the SDS for further information.
Ensure there is good airflow and ventilation. Avoid contact with skin and eyes.
EPiC Aqua Epoxy
Related Products
EcoSafe Etch
EcoSafe Etch is designed for mature concrete and provides a suitable finish prior to sealing…
View products
