EPiC AquaFloor
High Strength, 2 Pack, Water Based Polyurethane
EPiC AquaFloor
High Strength, 2 Pack, Water Based Polyurethane
-
2 Pack Product
-
Car
-
Clear
-
Coloured
-
Industrial Grade
-
Low Odour
-
Non-flammable
-
Water Based
EPiC AquaFloor is a high-strength, water-based, low-VOC, 2-pack polyurethane floor coating. It protects concrete, timber, masonry, and primed metal surfaces. EPiC AquaFloor has been developed to provide excellent exterior and interior durability, protecting against petrol, oil, fatty oils, alkali, acid, and efflorescence. It is ideal for various applications, such as commercial and industrial floors and walls.
EPiC AquaFloor is also food-grade compliant and can be used in various areas, including restaurants, hospitals, and supermarkets.
Protects Against
- Petrol
- Oil
- Fatty Oils
- Alkali
- Acid
- Efflorescence
- Concrete
- Metal Surfaces
- Excellent interior and exterior durability
- Hardwearing
- Excellent adhesion
- Excellent hardness
- High resistance to abrasion
- Impervious to water and moisture
- Corrosion-resistant
- Easy application by brush, roll or spray
| Kit Size: | 4L, 20L |
|---|---|
| Appearance: | Clear or Coloured Viscous Liquid |
| Solubility: | Water |
| Film Forming Temperature: | 10°C |
| Dry Film Thickness: | 65 microns |
| Coats Required: | 2 Coats |
| Recoat Time: | 8 – 24 Hours |
| Touch Dry: | 6 – 8 Hours |
| Full Cure: | 7 Days |
| VOC Levels: | <10% |
| Colours: | 46 Standard Colours |
| Flammability: | Non-Flammable |
| Gloss Levels: | High Gloss |
| Pot Life: | 2 Hours |
| Ambient Application Temperature: | 10°C to 30°C ambient, dry conditions. |
| Coverage Rate: | 8 – 10 m2/L |
For detailed substrate preparation and application steps, please download the AquaFloor application guide.
Equipment Type
Roller or Brush.
Spray.
Do not store the mixed product in spray equipment to avoid damage.
Surface Preparation
Prepare bare concrete surfaces using EcoSafe Etch or Nu-EcoSafe Ultra Etch following the recommendations in the relevant TDS. Allow the surface to dry thoroughly before application.
Mixing
Mixing 4 Parts A to 1 Part B (single 2-pack kit). Mix using a drill mixer; hand stirring is not sufficient. Leave to stand for 10 minutes before use to allow full activation.
Please do not use it after the pot life has expired (2 hours).
Thinning
For spray application, use a 10% to 15% solution with clean water. Do not thin for brush or roller application.
Bare concrete and masonry surfaces should be thinned by 20% to 25% before the first coat is applied to enhance penetration and adhesion.
Application
Roller or brush: Apply two even coats, observing minimum film thickness, recoat and dry times as outlined in the TDS
Spray: Apply 2-3 even coats, observing minimum film thickness, recoat and dry times as outlined in the TDS
Drying and Curing
EPiC AquaFloor should be touch dry and recoatable after 8 hours. For a complete cure, allow the item to dry for seven days.
Observe all relevant Work Safe criteria for spraying 2 pack paint systems and wear an approved respirator. Refer to the SDS for further information.
Ensure there is good airflow and ventilation. Avoid contact with skin and eyes.
EPiC AquaFloor
Related Products
EPiC Epoxy 100
EPiC Epoxy 100 is a 100% solids, high build epoxy resin coating for interior concrete…
View products
EPiC Epoxy 500
The EPiC Epoxy 500 coating is a long wearing floor coating that is suitable for…
View products
EPiC PolyCryl
PolyCryl 2 pack is a high strength performance driven coating with resistance to corrosion and…
View products
